[Jun-2023] Dumps Practice Exam Questions Study Guide for the NCP-MCI-6.5 Exam
NCP-MCI-6.5 Dumps with Practice Exam Questions Answers
NEW QUESTION # 60
After configuring Active Directory as the desired authentication service, an administrator is not able to login into Prism Central using privileged account.
Which configuration must be checked first?
- A. Local user account
- B. Account lock status
- C. Cluster Lockdown
- D. Role Mapping
Answer: D
Explanation:
According to the Nutanix Community1, users can authenticate using their Active Directory credentials when Active Directory support is enabled for Prism Central. To enable Active Directory support, you need to configure Role Mapping12, which defines how Active Directory groups map to Prism Central roles.
https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/configuring-authentication-38051
NEW QUESTION # 61
When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?
- A. Restart on other hosts in the AHV cluster
- B. Restart on a best-effort basis if resources are available
- C. Perform a live migration to other hosts in the AHV cluster
- D. Perform a live migration on a best-effort basis if resources are available
Answer: A
NEW QUESTION # 62
How will an HDD failure affect VMs with data on the failed device?
- A. An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.
- B. A live migration will be initiated, moving the affected VMs to a host that contains the replica data.
- C. The VMs will remain operational on that host and continue to function normally with no noticeable impact
- D. The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.
Answer: C
NEW QUESTION # 63
An administrator receives complaints of poor performance in a particular VM.
Based on the VM performance metric, what is the most likely cause of this behavior?
- A. SSD tier is not big enough to serve workloads' IOPS demand.
- B. The host's CPU is severely overloaded.
- C. The VM needs more vCPUs
- D. Oplog is full cannot serve IO request from this VM.
Answer: C
NEW QUESTION # 64
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
Answer:
Explanation:
Explanation
Step 1 ---> Login into Prism Element.
Step 2 ---> Select the Gear Icon at top right of the page.
Step 3 ---> Click Upgrade Software.
Step 4 ---> Select the component to upgrade.
Step 5 ---> Click download.
Step 6 ---> Once the download completes, select upgrade.
Invalid:-
1 - Select Prism Central.
2 - Select user login.
3 - On left select upgrade Prism Central.
NEW QUESTION # 65
An administrator receives complaints of poor performance in a particular VM.
Based on the VM performance metric, what is the most likely cause of this behavior?
- A. The host's CPU is severely overloaded.
- B. The VM needs more vCPUs
- C. SSD tier is not big enough to serve workloads' IOPS demand.
- D. Oplog is full cannot serve IO request from this VM.
Answer: C
Explanation:
one of the key metrics to consider for VM performance is IOPS (Input/Output Operations Per Second), which is a measure of the number of input/output requests a device processes per second3. Another metric is throughput, which is a measure of how much data a device transfers per second3.
NEW QUESTION # 66
Refer to the exhibit.
Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)
- A. Host password changes
- B. CVM password changes
- C. Password policy changes
- D. BIOS password changes
Answer: A,B
NEW QUESTION # 67
In Files, how many FSVMs are deployed by default?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 68
How many Prism Central instances are required to deploy Leap:'
- A. One per physical site
- B. One per availability zone
- C. One per customer environment
- D. One per AHV cluster
Answer: B
NEW QUESTION # 69
Which component is supported by Prism Central storage policies?
- A. Virtual Machines
- B. Storage Containers
- C. Volume Groups
- D. VM Templates
Answer: C
NEW QUESTION # 70
An administrator wants to receive an environment summary report when a host failure occurs.
Which action would address the administrator's need?
- A. Create a playbook
- B. Enable App Discovery
- C. Configure an alert policy
- D. Edit report schedule
Answer: C
Explanation:
An alert policy can be configured to send out an environment summary report when a host failure occurs. This can be done by creating a policy that triggers an alert whenever a host fails and then configuring the policy to send out a report that provides a summary of the environment in which the failure occurred. This will allow the administrator to quickly get a view of the environment after a failure occurs, allowing them to take the necessary steps to address the issue.
https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-multicloud-infrastructure-6_5
NEW QUESTION # 71
An administrator manages an AHV cluster that is dedicated to a dev/test environment. The administrator receiving complaints from users that they are unable to create new VMs on the cluster.
After the reviewing the cluster, the administrator finds that the memory resources are almost fully utilized, with many VMs over-provisioned on memory.
What option is the most efficient resolution to enable additional VMs to be created?
- A. Enable Memory HA on the over-provisioned VMs.
- B. Upgrade the nodes with additional memory DlMMs.
- C. Enable Memory Overcommit on the over-provisioned VMs.
- D. Disable HA Reservation on the cluster.
Answer: D
NEW QUESTION # 72
A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?
- A. Disk Clones
- B. Volume Groups
- C. Shadow Clones
- D. Golden Images
Answer: B
NEW QUESTION # 73
An administrator needs to periodically send information about cluster efficiency via email to a set of users.
What should be configured to accomplish this task?
- A. Create a new' prism Central project.
- B. update Capacity Configurations in Prism Central.
- C. Configure Efficiency widget in Prism Central.
- D. Add a schedule to Prism Central reports.
Answer: D
Explanation:
To periodically send information about cluster efficiency via email to a set of users, the administrator can follow these steps:
Create a report in Prism Central that contains the relevant information about cluster efficiency.
Add a schedule to the report to generate and send the report via email to the set of users at a specified frequency.
This will ensure that the users receive regular updates about the cluster efficiency without the need for manual intervention.
NEW QUESTION # 74
An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the cluster.
What is most likely thee cause of this issue?
- A. The VLAN was not created on the upstream switches.
- B. There is a firewall rule blockingVLAN512 traffic.
- C. VLAN512 is a reserved VLAN ID, and not usable for guest VMs.
Answer: A
NEW QUESTION # 75
Which two permission assignment tasks can be accomplished via Prism Element? (Choose two.)
- A. Grant an active directory group permission to perform back operations
- B. Grant a user permission to view details of all VMs on a specific cluster
- C. Grant a user permission to create and delete snapshots on a specific VM
- D. Grant a user permission to create VMs on a specific storage container
Answer: C,D
Explanation:
Explanation
The two permission assignment tasks that can be accomplished via Prism Element are A. Grant a user permission to create VMs on a specific storage container and D. Grant a user permission to create and delete snapshots on a specific VM. With Prism Element, administrators can assign permissions to users and groups on a per-cluster, per-VM, or per-storage container basis. This allows them to control who can access which resources and perform which operations.
NEW QUESTION # 76
Prism Central will be installed manually on an AHV cluster.
Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)
- A. tmp
- B. data
- C. home
- D. boot
- E. var
Answer: B,C,D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-pc-install-sc
NEW QUESTION # 77
After logging into Prism Element, an administrator presses the letter A on the Keyboard.
What is the expected outcome of this input?
- A. Alerts page will launch
- B. API Explorer page will launch
- C. Analysis will launch
- D. About Nutanix page will launch
Answer: B
Explanation:
API Explorer page will launch when an administrator presses the letter A on the keyboard after logging into Prism Element. This is one of the keyboard shortcuts that Prism Element provides for accessibility and ease of use1. API Explorer is a tool that allows users to explore and test Nutanix REST APIs within Prism Element1.
https://www.nutanixbible.com/3b-book-of-prism-navigation.html
NEW QUESTION # 78
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)
- A. Log in over PE web UI.
- B. SSH to CVM.
- C. Update VM dialog.
- D. Use acli
Answer: B,D
NEW QUESTION # 79
Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?
- A. Change Native KMS to External KMS
- B. Deploy an additional Native KMS Server
- C. Disable encryption on the cluster
- D. Enable encryption for a VM
Answer: A
NEW QUESTION # 80
An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the cluster.
What is most likely thee cause of this issue?
- A. The VLAN was not created on the upstream switches.
- B. There is a firewall rule blockingVLAN512 traffic.
- C. VLANS12 is a reserved VLAN ID, and not usable for guest VMs.
- D. The administrator did not create the VLAN on all hosts
Answer: A
NEW QUESTION # 81
After configuring modules for a Remote Syslog Server, the settings are as shown. The administrator notices that even though the level parameter is set to EMERGENCY, that all monitor logs are being sent.
What is the likely cause of this issue?
- A. Having the Module Name set to STARGATE sends all monitor logs regardless of the level.
- B. A second rsyslog server is configured to send all monitor logs.
- C. A Log Level of EMERGENCY includes all monitor logs.
- D. The true setting for Include Monitor Logs sends all monitor logs regardless of the level.
Answer: C
NEW QUESTION # 82
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.
Which metrics should the administrator review in Prism Analysis Graphs?
- A. Cluster IO, CPU, Memory, Network, App Server CPU
- B. Cluster IO, CPU, Memory and Database and App Server CPU
- C. Cluster IO, Network, Database and App Server CPU
- D. Cluster CPU and Memory Only
Answer: A
NEW QUESTION # 83
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)
- A. Client OS iSCSI initiator
- B. Enable external client access
- C. Cluster Virtual IP address
- D. Data Services IP address
- E. iSCSI Multipathing I/O
Answer: A,C,D
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-c.html
NEW QUESTION # 84
......
The NCP-MCI-6.5 certification is a valuable credential for professionals working with Nutanix solutions. It demonstrates a high level of expertise in Nutanix solutions for multicloud environments, and can help individuals advance their careers and increase their earning potential. The certification is recognized by leading organizations in the IT industry.
The Nutanix NCP-MCI-6.5 certification exam is an excellent opportunity for IT professionals to enhance their skills and knowledge in managing complex IT infrastructures. It is highly valued by organizations that use Nutanix technology, and it can lead to higher salaries and more career opportunities. With the right training and preparation, IT professionals can pass the exam and achieve the Nutanix NCP-MCI-6.5 certification.
The NCP-MCI-6.5 certification exam is recognized globally as a valuable certification for IT professionals who work with Nutanix solutions. This certification is designed for IT professionals who want to expand their knowledge and skills in managing and deploying Nutanix solutions. The certification offers a competitive advantage to IT professionals and provides them with the opportunity to advance their careers by demonstrating their expertise in Nutanix Multicloud Infrastructure.
Free Nutanix Certified Professional NCP-MCI-6.5 Exam Question: https://prep4sure.real4prep.com/NCP-MCI-6.5-exam.html