[Jul-2023] HPE2-T37 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Pass HP HPE2-T37 Exam With Practice Test Questions Dumps Bundle
NEW QUESTION # 22
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?
- A. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
- B. During hpe oneView deployment customer may select configure proprietary HA mode.
- C. HPE OneView has a built-in HA feature that can be activated with an additional license
- D. HPE OneView availability relies on HA features provoed by the hypervisor
Answer: D
NEW QUESTION # 23
Which statement about a server profile for an Apollo system is true?
- A. Virtual WWNs and MAC addresses can be defined
- B. Fibre Channel connections can be defined
- C. Enclosure Group Is automatically selected
- D. UEFI optimized is the only available boot mode
Answer: B
NEW QUESTION # 24
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- B. HPE OneView Global Dashboard allows server profile replication and change management.
- C. PowerShell Library for HPE OneView allows scripted environment modification.
- D. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
Answer: A
NEW QUESTION # 25
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses for an operating system running on a Compute Module
- B. to provide static IP addresses to IL0 and interconnect modules if applicable
- C. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- D. to provide static IP addresses for storage systems managed in HPE OneView
Answer: B
NEW QUESTION # 26
Which components require an HPE OneView license for management?
- A. HPE Apollo XL 170r
- B. HPE Primera and HPE 3PAR
- C. Brocade and Cisco SAN Manager
- D. HPE Virtual Connect modules
Answer: D
NEW QUESTION # 27
What is required to add remote frame link topology to HPE OneView?
- A. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- B. Management ports of the remote frame link topology must be connected to the management LAN.
- C. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- D. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
Answer: D
NEW QUESTION # 28
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools. For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool should be removed from HPE OneView using a PowerShell script.
- B. The storage pool should be marked as read-only using HPE OneView.
- C. The storage pool state should be changed to discovered using HPE OneView.
- D. The storage pool should be disabled using the array management tool.
Answer: D
NEW QUESTION # 29
How will setting the Purpose field within the network definition of a server profile impact the network traffic?
- A. network purpose will impact the traffic only if Virtual Connect modules are used
- B. network purpose can give higher priority for a specific type of traffic
- C. network purpose will define QoS within Logical Interconnect
- D. network purpose does not affect the behavior of the network
Answer: C
NEW QUESTION # 30
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- C. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
Answer: A
NEW QUESTION # 31
Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)
- A. SFTP
- B. SCP
- C. HTTPS
- D. HTTP
- E. FTP
Answer: A,B
Explanation:
Scheduled to be uploaded to the remote location.
NEW QUESTION # 32
Refer to the exhibit.
Which statement about the storage pools shown is true?
- A. HPE OneView can be used to configure volume replication between these pools
- B. Volumes created on the first storage pool cannot use data reduction technologies
- C. Both storage pools are in a managed state and can be used for volume provisioning
- D. Both storage pools have a license applied that enables management of these pools
Answer: B
NEW QUESTION # 33
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
- B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- C. An external repository must be created, because standalone components are supported only In an external repository.
- D. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
Answer: B
NEW QUESTION # 34
Which statement regarding HPE OneView backup restore is true?
- A. During backup restore, users with Administrator privileges can still login to HPE OneView
- B. Users with Backup Administrator privileges can restore an HPE OneView backup
- C. Only users with Infrastructure Administrator privileges can restore an HPE OneView backup
- D. An HPE OneView backup can be used to restore individual components like server profile
Answer: C
Explanation:
Only an Infrastructure administrator can restore an appliance from a backup file.
NEW QUESTION # 35
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset BIOS settings to the defaults through the server profile after changing the boot mode
- B. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
- C. reset BIOS settings to the defaults so UEFI settings can be applied
- D. reset an il_0 management processor to activate the new boot mode for the server
Answer: D
NEW QUESTION # 36
Click option that will allow you to select a FlexNIC function for the specified connection.
Answer:
Explanation:
NEW QUESTION # 37
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame. - C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
Answer: B
NEW QUESTION # 38
Which action is allowed on storage pools managed by HPE OneView?
- A. Volume provisioning
- B. Setting storage pool replication
- C. Changing storage pool capacity
- D. Changing storage pool RAID level
Answer: C
NEW QUESTION # 39
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION # 40
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION # 41
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION # 42
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- B. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- C. The maximum supported number of the internal networks for logical interconnect is configured.
- D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
Answer: C
NEW QUESTION # 43
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. PowerShell Library for HPE OneView allows scripted environment modification.
- B. HPE OneView Global Dashboard allows server profile replication and change management.
- C. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- D. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
Answer: A
NEW QUESTION # 44
After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?
- A. The enclosure group has to be updated to match the original enclosure group.
- B. Server profile affinity is configured to Device Day + server hardware.
- C. IL0 firmware of the replacement server is different than firmware in broken server.
- D. The replacement server has more memory or CPUs than broken machine.
Answer: C
NEW QUESTION # 45
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. HPE OneView was restored from a backup that created inconsistency with the server profile template.
- B. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
- C. Changes to the server profile were implemented directly on the server profile.
- D. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
Answer: C
NEW QUESTION # 46
......
2023 Valid HPE2-T37 test answers & HP Exam PDF: https://prep4sure.real4prep.com/HPE2-T37-exam.html